FREETIMEWEB
E L E C T R O N I C S

P H I L I P S / VIDEO

Model: VR2340, Manufacturer: PHILIPS

The following faults for VR2340 / PHILIPS are contained:
Channel is distorted during playback
No sound during playback.
Replacement bolt.
Modification in adjustment of potentiometer 3218 on deck print A640.
Actuator contact interference.
Improvement of luminance signal during playback.
Compartment opens/closes, laces in and out continuously and does not lace in after playback.
Code number compartment lid.
Micros VR2340.
PB is poor, noisy picture, sound howls. Freeze-frame ok.
Station memory fails.
Fails or does not function correctly.
Sound drones.
Cassette lid goes to and fro arbitrarily.
Start up OK. All functions OK but switches to STOP after approx. 2 secs.
At start up appliance begins to initialise then stops (S' time goes out).
Fuses 1006 and 1008 blow.
In PB and tape transport appliance loads tape and stops.
Appliance stops in playback.
No picture in playback.
Cassette compartment highers and lowers.
Sudden stop on the picture.
Partial function fault (F chassis). Motor runs in standby.
No power supply (version F).
Intermittently picture is noisy on playback.
No sound in EE operation.
During own recording the sound is too low.
Stored stations are missing.
Station search does not stop.
No picture during own recording.
Station search and programme indication do not work.
Interference lines during playback.
Programme changing is not possible. With no station tuned, there is only noise in the picture.
During playback the picture is blurred and distorted.
During playback and EE operation the picture is distorted or runs through.
No picture, synchronisation is missing (the picture shows diagonal distortion)
The picture of an own recording shows shadows.
No recording possible.
Station search does not work correctly, band II is shown.
Tuning voltage is missing.
Appliance switches on and off by itself
Appliance unlaces after running for a short time.
Forward and rewind do not work.
Appliance switches off after a certain time. Tape loops form behind the pinch roller.
Appliance switches off by itself.
The tape drive keyboard does not function and 4 lines show in the counter.
No function
All rewind functions are defective.
Forward mode functions are defective.
When lacing up the tape, the video head does not run.
The appliance laces up for a short time and then switches off.
No programme indication.
The drive switches off uncontrolled and initialises several times.
Interference lines during playback and the sound varies.
The appliance switches on and off continuously, the clock flashes, the drive initialises continuously.
The head motor does not run, T7201 on the A630 board becomes hot during lacing up.
No function, the display is dark.
No function, the display is dark, the drum motor runs.
Whistling noises during play.
No function, fuses 1006 and 1008 in the power supply unit are defective.
Capstan motor runs backwards and the stations do not function.
No forward or reverse function, appliance switches off.
The tape is damaged.
Squeaking noise during playback, sometimes after operating for a long time.
Occasionally there is no forward and rewind possible.
No Y-Signal, RGB and sound are ok.
No sound during EE and playback.
No sound from the tuner and tape, or is it too low.
Picture is wavy in CUE and REV.
On tuner occasionally channel 1 fails and during PB of the tape, VCR is too sensitive for high tones.
The picture does not record, FM is missing.
The picture drops or falls in the direction of the raster.
No record, no playback.
DTF does function during special function.
The EE picture hums, the test picture is ok.
The appliance always switches to time function. Timer function 2 blinks.
No picture during record, only noise. The sound is ok.
The appliance winds on only one side.
Lines in the picture on PB. After removing the earthing cable between the drive and the "left printer", the lines disappear but wavy lines remain.
The appliance winds only on one side.
Tape tension is faulty during tape switching.
The capstan motor occasionally runs too fast.
Poor contact in plug/socket F7
No drive functions

SOURCE:http://www.euras.com

© Copyrights Freetimeweb