FREETIMEWEB
C P
C C O M P U T E R - C
O L L E C T I O N
IF
NOT COMPLETE WITH FRAMES, CLICK HERE
FOR THE FREETIMEWEB SITE
MY CPC COMPUTER
CONTROLLER +DRIVES |
|
CPC
- 464 DDI 3"DISCDRIVE CONTROLLER
-
CPC EXTENDED COMPUTER
(DUTCH
/UK)
CPC - 464 DDI
3"DISCDRIVE SET
Amstrad made two
different disk drives for the Amstrad/Schneider CPC range:
DDI-1: a set
consisting of the real DDI-1 (= Disk Drive Interface) and a FD-1 3" disk
drive, as well as the CP/M 2.2 license and disk.
This set was
for the CPC464 which didn't have a built-in 765 FDC disk controller.
FD-1: a 3" disk
drive as secondary disk drive unit for the CPC664, CPC6128, and for the
CPC464 with DDI-1
All drives are
for use with CF2 Compact Floppy Disc 3" discs.
There was no
official external disk drive for the 6128Plus or even the 464Plus. The
difference between a CPC664/CPC6128 and a 6128Plus was simply a changed
pin-out which can easily be solved by a new plug on the disk drive's cable.
The 464Plus was
harder to equip with a disk drive. Although the pin-out of the expansion
port was left unchanged, the DDI-1 cannot be used on the 464Plus without
modifications.
|
|
|
|
CPC
- 464 DDI-3 CLONE USB CONTROLLER
(Produced bij
ZAXON)
Click
for More
|
|
|
|
CPC
- 464 DDI-3 +512Kb Ram CLONE USB CONTROLLER
(Produced bij
ZAXON)
Click
for More |
|
|
|
CPC
- DK'TRONICS SILICONDISC
- OMSCHAKELBAAR >> GEHEUGEN - SILICONDISC
- SWITCHABLE >>>>> MEMORY - SILICONDISC
The Memory Expansion
and Silicon Disc from Dk'tronics are both RAM expansions. The Silicon Disc
additionally comes with a ROM which contains RAM-Disc functions.
Dk'tronics produced
2 different Memory Expansions, a 64K and a 256K which were compatible with
all (non Plus) CPCs.
The expansions
meant that CP/M Plus and CP/M 2.2 (with the use of a utility supplied)
could both access a 'massive' 61K TPA.
Silicon Discs
These were intended
to be used as RAM disc, made in 64K and 256K versions, too. |
|
|
Klik voor vergroting / Click to Enlarge
ROM-Manager
Under BASIC you
can use ROManager BASIC to manage all 32 ROMs of the SYMBiFACE II. It can
load/save all 32 or one 16 KB ROM. Further you can copy, move, erase, park,
unpark or check ROMs.
The simulated
ROMs of the SYMBiFACE II can also be handled by a ROM manager which runs
under SymbOS. This tool allows displaying, loading, saving and deleting
the 32 x 16K ROMs.
The most comprehensive
application for the SYMBiFACE II ROM management "ROManager" runs under
FutureOS. It allows you to display the existing ROMs, load or save one
or all ROMs, test a ROM, adapt the checksum, copy, paste and delete ROMs
etc. |
|
CPC
- SYMBIFACE II
- IDE HARDDISK CONTROLLER
SYMBiFACE II
is a multi-function expansion, developed by Dr.Zed, with support from Octoate,
Tolkin, TFM and Prodatron. Portions of the design are based on the CPC-IDE
prototype.The SYMBiFACE II homepage doesn't seem to allow to buy the hardware,
nor does it allow to download schematics. To order a SF2 you can get in
contact with the developper Dr.Zed.
CPC SYMBiFACE
II provides one solution for connecting a CPC with an IDE hard disc. You
can use a master and a slave device.
IDE Features
Supports IDE
hard discs with up to 128 GB.
Bigger HDD or
CD/DVD drive support possible with drivers.
Simultaneous
operation of two hard discs (master and slave) for a total of up to 256
GB on your CPC!
Transfer speed
of 162 KByte/s. That's as fast as copying memory inside the CPC with LDIR.
In practice (loading FAT16/32 files) the speed is still about 130 KB/s
(SymbOS-FAT-driver).
External power
supply provided: no extra load for the CPC's internal PSU.
No timing problems:
Interrupts don't need to be disabled during the data transfer with the
hard disc. The hard disc can operate while you play sound or doing other
things with your CPC (multitasking etc.).
Traffic activity
display via a LED on the board.
Additional Features
512 KB RAM extension,
which is fully compatible with the CPC 6128 and the dk'tronics RAM extension
512 KB rewriteable
ROM. You can upload up to 32 ROMs, which are persistent. You can also use
the ROM space as an additional RAM extension. ROMs can be switched on or
off via switches or via software.
PS/2 mouse connector.
This makes it possible to connect wireless and optical mice (PC compatible,
therefore inexpensive) to your CPC.
Real time clock,
which is fully PC compatible and (as seen on the photo) provides additional
128 byte persistent RAM, which can be used to store config data. |
|
|
|
CPC - VORTEX
HARDDISK CONTROLLER
- WITH OS SYSTEM
-
CPC VORTEX COMPUTER
(DUTCH /
UK)
CPC - VORTEX DISKDRIVE-SET
720KB
- WITH CONTROLLER AND OS SYSTEM
Disc drives from
Vortex, with 80 tracks and 720K capacity (704K available).
These are the
original drives from Vortex, for use on CPC 464. The hardware supports
one or two 80 track drives, additionally a 3" FD-1 can be connected as
third drive, ie. unlike most other CPC disk interfaces it supports more
than 2 drives. VDOS allocates RAM for only 2 drives though, which of the
3 drives are in-use is selected with |S command.
Vortex Add-ons
Vortex X modul
(adding RS232 support to -X drives)
VDOS2.0 (upgrading
older drives to VDOS 2.0)
Second drive
unit (for upgrading a single -S drive to a dual -D drive).
Vortex Disk Format
Sector numbers
are 01h..09h (same as AMSDOS IBM Format, but with a 9th sector). Disks
are Double-Sided, Double Density, 80 Tracks, 9 Sectors, blocks are allocated
in 4K units. Total capacity is 720K (704K available):
First 9K contain
two System Tracks (eg. CP/M Bootstrap)
Next 4K contain
directory (see Note)
Next 704K are
data (allocated in 4K blocks) (aka 4K clusters)
Last 3K are unused
(due to 4K allocation size)
Note: According
to the manual, the directory can hold 128 entries under VDOS2.0 (whole
4K used), but only 64 entries under VDOS1.0 (only half of the 4K area used).
The Vortex -Z
drives do not seem to include any VDOS ROM (so they do support only normal
40-Track AMSDOS Formats, but NOT the 80-Track Vortex format). |
© Copyrights Freetimeweb |